At first glance, the concept of engine compression is simple enough:It's the ratio of the volume of the combustion chamber and bore when thepiston is at bottom dead center (BDC) versus when it is at ...

"Too little compression will usually result in unmet performance expectations. On the high side [too much compression] carries greater risk in tuning and potential component failure if appropriately ...

You'd think that the pistons listed for a 10.5:1 compression ratio would actually give you 10.5:1. But it's usually not that simple. Perhaps that's why so many four-wheelers have a foggy or incomplete ...

A refrigeration system’s compression or pressure ratio is defined as the absolute discharge pressure divided by the absolute suction pressure. Calculating this ratio can be a big help when it comes to ...

The temperature of the refrigerant entering the compressor’s cylinder also has an effect on capacity, but for this article, we’ll focus on pressures. COMPRESSION RATIOS Both the high- and low-side ...

The "Mods for 2V Mods" series in our sister publication, Muscle Mustangs & Fast Fords, took a hard look at the effect of changes in compression ratio on a two-valve 4.6L GT motor. The idea behind the ...